The 2017 Jeep Renegade offers drivers a blend of rugged capability and urban agility, making it a popular choice for adventure seekers and city commuters alike. Understanding the specific oil capacity for your Renegade is a fundamental part of proper vehicle maintenance, ensuring the engine runs smoothly for years to come. This guide provides detailed information on the 2017 Jeep Renegade oil capacity, breaking down the specifications by engine type and explaining the importance of using the correct grade of lubricant.
2017 Jeep Renegade Engine Options Overview
To determine the correct oil capacity, one must first identify the specific engine installed in the 2017 model year. Jeep equipped the Renegade with two distinct powertrains during this period, each with its own engineering requirements. The base model typically featured a capable four-cylinder engine, while the higher trims offered a more powerful option to satisfy drivers seeking additional performance.
Oil Capacity for the 1.4L MultiAir Engine
The standard 1.4L MultiAir turbocharged engine found in many 2017 Jeep Renegade trims requires a specific amount of oil to function correctly. For this configuration, the total oil capacity is approximately 3.2 quarts. This figure includes the oil filter, meaning you will pour slightly less than this amount into the drain plug after replacing the filter. Always verify this specification in your owner’s manual, as trim levels can vary slightly year to year.
Recommended Oil Type and Viscosity
Maintaining the correct oil capacity is only half the battle; using the right formula is equally important. For the 1.4L MultiAir engine, Jeep recommends using a synthetic blend or full synthetic oil with a viscosity rating of 5W-20. This specific grade provides the necessary protection against wear in both cold starts and high-temperature driving conditions, helping to maintain fuel efficiency and engine longevity.
Oil Capacity for the 1.8L TigerShark Engine
For drivers who opted for the more robust powertrain, the 2017 Jeep Renegade offers the 1.8L "TigerShark" naturally aspirated engine. This larger displacement unit has a higher oil capacity to lubricate its additional components. The total oil capacity for the 1.8L engine is approximately 3.7 quarts. As with the smaller engine, this calculation factors in the replacement oil filter.
Maintenance Considerations for the Larger Engine
While the TigerShark engine is known for its durability, adhering to the 3.7-quart capacity is vital for optimal performance. Using an insufficient amount of oil can lead to inadequate lubrication and potential engine damage, while overfilling can cause increased pressure and oil foaming. Owners should select a high-quality 5W-20 or 5W-30 synthetic oil to ensure proper protection for this larger unit.
How to Check and Add Oil
Regularly checking the oil level is the best way to ensure your Renegade remains properly lubricated between changes. Owners should park the vehicle on a level surface, turn off the engine, and wait a few minutes for the oil to settle. Locate the dipstick, pull it out, wipe it clean, reinsert it fully, and then pull it out again to check the level. If the oil is below the "Full" mark, add the correct type of oil slowly through the filler cap until it reaches the appropriate level, staying within the recommended capacity.
The Importance of Using the Correct Capacity
Adhering to the 2017 Jeep Renegade oil capacity guidelines is not merely a suggestion—it is a critical maintenance step that impacts the entire drivetrain. Proper oil levels ensure that moving parts are adequately separated by a thin film of lubricant, reducing friction and preventing premature wear. This practice directly contributes to the vehicle’s reliability, resale value, and overall satisfaction.
